3M™ Urethane Foam Tape 4314

Products
  • Charcoal gray, 0.250 in. (6.4 mm) soft conformable, low-density, open-cell foam design helps seal out air, dust and light when compressed
  • Excellent cushioning characteristics and high absorbency
  • Dampens sounds and absorbs vibration when used in electronic applications
  • Offers high initial quick-stick to multiple substrates
 More
View all details
Overall Width (Metric)
Overall_Width_Metric
Products Available
 Overall Width (Metric)
All Models
Close
Details
  • Charcoal gray, 0.250 in. (6.4 mm) soft conformable, low-density, open-cell foam design helps seal out air, dust and light when compressed
  • Excellent cushioning characteristics and high absorbency
  • Dampens sounds and absorbs vibration when used in electronic applications
  • Offers high initial quick-stick to multiple substrates
  • Provides excellent shear strength and high temperature performance

3M™ Urethane Foam Tape 4314 is a conformable, low-density, open-cell foam tape with a pressure sensitive acrylic adhesive on one side. This tape will adhere to a variety of substrates and can be used in numerous mounting applications to dampen sound and create a clean and durable product.

Seals Out Moisture, Dust and Drafts 3M™ Urethane Foam Tape 4314 is 1/4 in. thick, comprised of a soft conformable, low-density, open-cell foam with a pressure sensitive acrylic adhesive on one side. The adhesive is protected by a silicone treated paper liner. It offers excellent cushioning characteristics while providing high absorbency to seal out moisture, dust and drafts. It can perform under a wide range of temperatures. Special note: Extra care should be taken when handling to avoid damaging tape. Recommended Applications Cushion and dampen sound in electronics such as printers, keyboards, computers, aircraft lights and automotive dashboards Register covers Recessed lighting Door, window and cabinet seals Excellent Shear Holding Strength with 3M™ Adhesive 430 3M™ Urethane Foam Tape 4314 features 3M™ Adhesive 430. This pressure sensitive, modified acrylic adhesive provides high initial quick-stick to a variety of surfaces and substrates. It has an excellent chemical resistant and shear holding strength, even at elevated temperatures. Adhesive 430 is designed to perform at temperatures up to 180°F (82°C) in the short term and 150°F (70°C) long term.  Protect Sensitive Components The adhesion of 3M™ Single-Coated Foam Tapes is typically satisfactory within 20 minutes and continues to build with additional time. The adhesive is protected by a thick, silicone treated paper liner and has a firm, high-density foam. This design offers an attractive and clean appearance after application.  What is Open Cell Foam? Open cell foams are commonly used between component panels where a degree of separation is needed to dampen or prevent vibration, as a thermal insulation barrier and to protect against contamination, but where a measure of airflow is still necessary, such as with electronic components where air flow helps keeps components cool.

Specifications
Adhesive Type
Acrylic
Brand
3M™
Elongation at Break
1.25 Percent
Indoor/Outdoor
Indoor/Outdoor
Industries
Appliance, Automotive, General Industrial, Specialty Vehicle, Transportation
Maximum Operating Temperature (Celsius)
66 Degree Celsius
Overall Length (Metric)
16.45 Meter, 16.5 Meter
Overall Width (Metric)
1.3 cm, 19.05 mm, 2.5 cm, 38.1 mm, 50.8 mm, 6.35 mm, 9.52 mm
Primary Liner
Paper, Silicone Treated Paper
Primary Liner Color
Tan
Product Color
Charcoal Grey
Shelf Life
18 Month
Tensile Strength (Metric)
170 kg, 172 Kilopascal
Total Tape Thickness without Liner (Metric)
6.27 mm
Units per Case
12, 18, 24, 36, 6, 9