3M™ Adhesive Transfer Tape 9458, Clear, 1 mil, Roll, Config

3M™ Adhesive Transfer Tape 9458 is a thin, high-tack adhesive transfer tape designed for general purpose transfer applications. This tape is mounted on a 55 lb. densified kraft paper liner and is ideal for rotary die-cutting applications. It provides good chemical and UV resistance.

Ideal for Rotary Die-Cutting Processes 3M™ Adhesive Transfer Tape 9458 is a thin, high tack adhesive designed for rotary processing and high and low surface energy pats. It features 1 mil of our 3M™ High Strength Acrylic adhesive which delivers a high strength bond for thin width applications. Mounted on a 55 lb. densified kraft paper liner, this tape works well for a variety of applications including rotary die-cutting processes. The liner delivers added strength, resisting breakage for time-saving one-piece liner removal.  Recommended Applications Graphic nameplates Overlays on metal and low surface energy plastic surfaces Bonding metal nameplates and rating plates High Strength, Thin Bond 3M™ 300 High Strength Acrylic Adhesive is a high-tack acrylic adhesive system featuring high initial adhesion and bonds well a wide variety of materials, including high and low surface energy plastics, textured plastics, foams, fabrics and coated papers. It features good chemical, solvent and UV resistance. Despite a thin profile, this adhesive is high-tack and high strength, even in elevated temperatures. 300 High Strength Adhesive forms a consistently strong bond across a range of temperature, including up to 250°F/121°C. By using a 55 lb. densified kraft paper liner, this tape provides reliable performance for a variety of applications, including graphic attachment options and select die-cutting processes. What are Adhesive Transfer Tapes? In general, 3M adhesive transfer tapes are rolls of pressure sensitive adhesive pre-applied to a special release liner. The tape consists of adhesive only, and does not have any type of backing material. For application the tape is positioned adhesive side down to a surface and the liner is removed, exposing the backside of the adhesive to the joining surface.