3M™ Membrane Switch Spacer 7956WDL, White, 24 in x 36 in, 6 mil, 100 Sheet/Case

3M™ Membrane Switch Spacer 7956WDL features a 2 mil white PET film carrier with a metallized vapor coat for added opacity, ideal for graphics. 3M™ High Performance Acrylic Adhesive 200MP delivers excellent shear strength during repeated switch actuation and forms clean edges for precise slitting and die-cutting. A PCK paper liner resists humidity and adds stability for improved sheet processing.

A Top Performer Before, During and After Application Featuring 3M™ High Performance Acrylic Adhesive 200MP, the 3M™ Membrane Switch Spacer 7956WDL is excellent for graphic applications. Its white 2.0 mil polyester film carrier adds structural strength, and a metallized vapor coating creates outstanding opacity for vivid graphic displays. The adhesive, applied at 2.0 mils on each side of the film, is ideal for the stresses of switch actuation over long periods. It is formulated for excellent shear strength – forming a durable bond with plastics and other smooth surfaces with less oozing at the edges. This allows for easier slitting and die-cutting, faster part processing and minimal waste. Twin 4.2 mil 58 lb. polycoated kraft (PCK) paper lay-flat liners are designed to cover adhesive consistently for full bonding performance after application. Liners resist curling, tunneling and buckling, increases dimensional stability and holds up even under high humidity for efficient storage and processing. Liner design also enables improved rotary die-cutting at high speeds, as well as improved sheet processing. Recommended Applications Membrane switch spacers Graphic and non-graphic applications Switch mounting Circuit layer assembly Metal dome placement Lead protection Die-cut laminations Resilient and Ready 3M™ Membrane Switch Spacer 7956WDL is constructed with 2.0 mil high performance acrylic adhesive that is coated on each side of a 2.0 mil white metallized vapor-coated polyester film carrier. This membrane switch spacer is double-linered with twin 4.2 mil, 58 lb. moisture-resistant, lay-flat, PCK paper liners. Designed to separate switch circuitry until actuation, 3M™ Membrane Switch Spacer 7956WDL provides excellent temperature resistance (up to 400⁰F/204⁰C short-term heat resistance), solvents and UV resistance. About High Performance Acrylic Adhesive 200MP 3M™ High Performance Acrylic Adhesive 200MP is an industry standard for graphic attachment and general industrial joining applications. It features outstanding adhesion to metal, polycarbonate (PC), ABS and polyester (PET), making it popular across many industries. This adhesive provides some initial repositionability for placement accuracy when bonding to plastics. It also performs well after exposure to humidity and hot/cold cycles, providing confidence that the switch will perform through difficult environmental conditions and millions of actuations. The Right Choice for a Range of Applications With low cost, long life, outstanding environmental performance and eye-catching graphics, membrane switches are found in more and more applications. They range from farm tractors and medical test systems to microwave ovens and fish finders. Whatever the need, 3M has a membrane switch construction suited for the job. Bringing Better Ideas to the Surface through Science The 3M Industrial Adhesives and Tapes Division applies the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, these technologies help customers like you deliver competitive products to the market faster and more efficiently.