Scotch-Brite™ EXL Deburring Convolute Wheel, XL-WL, 9S Fine, 6 in x 1 in x 1 in, 3 ea/Case

Scotch-Brite™ EXL Deburring Wheel features a hard, dense consistency that quickly deburrs, finishes, and polishes all types of metals, composites, glass and leaves a smooth, clean surface. Its conformable characteristic makes the wheel ideal for deburring stamped or laser cut parts, or for finishing after belt sanding.

Scotch Brite™ EXL Deburring Wheel features a hard, dense consistency that quickly deburrs, finishes, and polishes all types of metals, composites, glass and leaves a smooth, clean surface. Our EXL deburring wheels are conformable, making it ideal for deburring stamped or laser cut parts and for finishing after belt sanding. A unique resin system produces less smearing, reducing clean and prep time. Convolute construction and clean, uniform wear keep these wheels running smoothly and help the operator attain a professional finish while minimising fatigue. Scotch Brite material runs cool and provides these wheels with uniform wear and keeps fresh abrasives continuously exposed, making them a superior choice on heat sensitive substrates. The toughness of these wheels extend their service life. They are available with silicon carbide or aluminium oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low pressure applications such as paint preparation and finishing. Aluminium oxide is a hard, blocky mineral that provides high cut rate and long life. While silicon carbide breaks down faster than aluminium oxide, it produces a finer finish Scotch Brite abrasives are unique surface conditioning products with abrasives incorporated into a non woven fibre matrix. Combining abrasives and non woven material creates an abrasive system that delivers consistent results for the life of the product. The open web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibres.