1. Singapore
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Cold Shrink Splices
  6. 3M™ Cold Shrink Splicing Kit QS2001B, Tape, Wire, Unishield, 15 kV, Standard, 1 per case

3M™ Cold Shrink Splicing Kit QS2001B, Tape, Wire, Unishield, 15 kV, Standard, 1 per case

Part Number QS2001B3M ID 80611265754
  • Specially designed to connect extruded dielectric power cables
  • Designed for JCN, CN, tape shield, UniShield® and wire shield cables
  • 1 to 1.35-in O.D. insulation
  • Accommodates wire size of 2 AWG to 500 kcmil
 More
View all details
Details
  • Specially designed to connect extruded dielectric power cables
  • Designed for JCN, CN, tape shield, UniShield® and wire shield cables
  • 1 to 1.35-in O.D. insulation
  • Accommodates wire size of 2 AWG to 500 kcmil
  • Includes 1 roll Scotch® electrical semi-conductive tape 13, 2 outer covers and 1 roll 3M™ Temflex™ vinyl electrical tape 1800
  • Rated for 15 kV applications
  • 1 kit/case

3M™ QS-2001B Series Cold Shrink Branch Splice Kit is specially designed to connect extruded dielectric power cables that are rated at 15 kV. The kit uses cold shrink technology for superior interfacial pressure and comes in a versatile design to make installation easy. It is used with JCN, CN, tape shield, UniShield® and wire shield cables.

3M™ Cold Shrink Branch Splice QS-2001B lets you easily splice and tap extruded dielectric power cables rated up to 15kV. This silicone rubber splice provides economical, effective installations without force pushing, pulling or heat (torch) of traditional splices.
Since 3M invented it more than 30 years ago, Cold Shrink technology has been proven reliable by field use and laboratory testing. It offers interfacial pressure superior to that of push-on and heat shrink splices.
The 3M™ Cold Shrink Branch Splice QS-2001B kit connects medium-voltage cables including cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR), metallic wire, tape shield or JCN and plastic jacket. The set-screw connector in the QS-2001B kit adapts to a range of cable sizes. The 3M™ Cold Shrink Branch Splice QS-2001B can be used as an aerial splice, on cable trays or in direct burial applications. It is available with an adapter kit for splicing with cables of smaller diameter.
This factory-tested splice meets requirements specified in the IEEE-404 Standard.

Insulation Outside Diameter Range:
· 1.00 - 1.35 Inch, 0.63 - 1.01 Inch (with QS2000BA Accessory)
· 25.4 - 34.29 mm, 16.26 - 25.65 mm (with QS2000BA Accessory)

Specifications
Application
Cable Connection
Brand
3M™
Cable Shielding
Tape Shield, UniShield®, Wire Shield
Conductor Size
500 kcmil
Conductor Sizes
1 AWG (with QS2000BA Accessory), 1/0 AWG (with QS2000BA Accessory), 2 AWG (with QS2000BA Accessory), 2/0 AWG (with QS2000BA Accessory), 250 kcmil (with QS2000BA Accessory), 3/0 AWG (with QS2000BA Accessory), 350 kcmil, 4/0 AWG (with QS2000BA Accessory), 400 kcmil, 500 kcmil
Connector Included
Yes
Insulation O.D. Range (Metric)
25,4 - 34,3 mm (16,2 - 25,6 mm with QS-2000BA Adapter Kit)
Model
Cold Shrink
Number of Conductors
1
Product Series
QS2001B Series
Product Technology
Cold Shrink
RoHS 2011/65/EU Compliant
Undetermined
RoHS EU Comments
Contact 3M for information
Splice Type
Branch
Suggested Accessory
3M™ Cold Shrink Branch Splice Adapter Kit QS-2000BA
Voltage
15 kV