1. Singapore
  2. All 3M Products
  3. Coatings
  4. Electrical Resins
  5. 3M™ Scotchcast™ Electrical Resin 260, 44.1 lb.(20 kg.)/box

3M™ Scotchcast™ Electrical Resin 260, 44.1 lb.(20 kg.)/box

3M ID 80610843221UPC 50051138466560
  • Has 12 to 16-second gel time at 380 °F (193 °C)
  • Useful for moisture-proofing and insulating armatures, stators, buss bars and toroid cores
  • Withstands temperatures of 356 °F (180 °C)
  • Compatible with electrostatic spray, fluid bed dip and venturi spray‎
 More
View all details
Details
  • Has 12 to 16-second gel time at 380 °F (193 °C)
  • Useful for moisture-proofing and insulating armatures, stators, buss bars and toroid cores
  • Withstands temperatures of 356 °F (180 °C)
  • Compatible with electrostatic spray, fluid bed dip and venturi spray‎
  • Heat-, chemical- and moisture-resistant
  • UL Listed, EIS Approved and RoHS 2011/65/EU Compliant‎

3M™ Scotchcast™ Electrical Resin 260 is a 1 part, powder resin used for coating flat surfaces, corners and high points. This general purpose epoxy based, powder resin has a very low viscosity property, which makes it easy to infuse on any surface. The resin melts when it's heated, it flows to a controlled extent and then cures, bonding to the surface in a uniform, thick coating.

3M™ Scotchcast™ Electrical Resin 260 is a widely used, well-known general purpose epoxy powder resin. A one-part, green pigmented, rapid heat-curing product, it is designed to provide a continuous, tough, moisture and chemical resistant dielectric coating to a variety of substrates. It is manufactured by a fusion blend process, insuring that each individual particle of powder contains all the components necessary to effect a complete cure and attain stated performance properties. Resin 260 is applied to an object that has been heated to a temperature above the melting point of the resin. On contact with the preheated application surface, the resin melts, flows to a controlled extent, then cures, bonding to the substrate and coalescing into a smooth, continuous, essentially uniform, thick coating. It effectively coats flat surfaces and corners, as well as, high points. Uses for resin 260 include moisture-proofing and insulating armatures, stators, buss bars and toroid cores.

Specifications
Applicable by Electrostatic Fluid Bed
Yes
Applicable by Electrostatic Spray
Yes
Applicable by Fluid Bed Dip
Yes
Applicable by Venturi Spray
Yes
Application
Utilities & Power: Coatings for Insulation
Brand
Scotchcast™
Cure Method
Oven
Flame Retardant
No
Material
Epoxy
Maximum Operating Temperature (Celsius)
180 Degree Celsius
Product Type
Electrical Resin
RoHS 2011/65/EU Compliant
Yes
RoHS EU Comments
RoHS 2011/65/EU compliant without exemption
Temperature Rating
Class H (<=180 deg C)
Voltage Rating
Insulating