1. Singapore
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Cushion-Mount™ Plus Plate Mounting Tape 1115

3M™ Cushion-Mount™ Plus Plate Mounting Tape 1115

17  Products
  • 0.015 inch (0.38 mm) double coated foam tape has a high plate side adhesive technology designed to resist edge lifting on flexographic print plates
  • Has a soft density foam that is ideal for process printing with halftone dots
  • Tan foam color indicates process printing density foam
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
 More
View all details
Overall Width (Metric)
Overall_Width_Metric
17 Products Available
 Overall Width (Metric)
All Models
Close
Details
  • 0.015 inch (0.38 mm) double coated foam tape has a high plate side adhesive technology designed to resist edge lifting on flexographic print plates
  • Has a soft density foam that is ideal for process printing with halftone dots
  • Tan foam color indicates process printing density foam
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
  • Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
  • Plate demounts from the double coated cushioned tape without adhesive residue
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • Available in a variety of application methods including die-cut, flatbed and friction fed

Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape 1115 is designed for mounting flexographic print plates to cylinders or sleeves. This tan foam mounting tape provides high quality process print.

Recommended Applications Mounting photopolymer plates to flexographic printing cylinders and sleeves Used in process printing 3M sticky back tapes are designed for narrow web presses to print tag and labels 3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs. This cushion tape is manufactured for 15 mil applications. It is constructed with engineered acrylate adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting. Keep the Presses Running and your Customers Coming Back For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.

Specifications
Adhesive Type
Differential Acrylate
Air Release
No
Backing Material
Polyethylene Foam
Backing Thickness (Metric)
0.432 mm
Brand
Cushion-Mount™
Composite Sleeves
No
Industries
Print
Overall Length (Metric)
22.86 Meter, 23 Meter
Overall Width (Metric)
101.6 mm, 1372 mm, 152.4 mm, 165.1 mm, 177.8 mm, 254 mm, 304.8 mm, 330.2 mm, 342.9 mm, 355.6 mm, 406.4 mm, 419.1 mm, 457.2 mm, 508 mm, 558.8 mm, 609.6 mm, 914.4 mm
Primary Liner
Polycoated Kraft Paper
Print Quality
Process Printing
Print Quality (Series)
11 Series
Product Color
Tan
Product Form
Roll
Total Tape Thickness without Liner (Metric)
0.43 mm
Units per Case
1, 4, 8
Urethane Sleeves
Yes