1. All 3M Products

Scotch-Brite™ Surface Conditioning Disc

90  Products
  • Variety of abrasive grades and sizes provide an ideal starting point for cleaning, finishing, blending, and light deburring
  • Open web material runs cool and resists loading for prolonged operation
  • Conformable disc conditions surfaces without gouging, undercutting, or damaging the base material
  • Suitable for metal, composite, plastics, and other materials
 More
Diameter (Metric)
90 Products Available
 Diameter (Metric)
All Models
Showing 24 of 90
Close
Details
  • Variety of abrasive grades and sizes provide an ideal starting point for cleaning, finishing, blending, and light deburring
  • Open web material runs cool and resists loading for prolonged operation
  • Conformable disc conditions surfaces without gouging, undercutting, or damaging the base material
  • Suitable for metal, composite, plastics, and other materials
  • Hook and loop attachment system provides fast disc change-out for multi-step finishing processes

Scotch-Brite™ Surface Conditioning Disc comes in a wide variety of grades and sizes and is an ideal first-step for cleaning, blending, deburring, and finishing. Durable, non-woven fiber construction conforms well on irregular or contoured surfaces without undercutting or damaging the base material.

The open-web material runs cool and resists loading to enable prolonged operation while evenly distributed aluminum oxide abrasives produce a high cut-rate for consistent finishing. Our Scotch-Brite™ Surface Conditioning Disc uses aluminum oxide abrasive. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. Our Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Specifications
Applications
Deburring, Finishing, Grinding, Surface Preparation
Attachment Type
Hook & Loop, Hook and Loop, TN
Back Color
Blue
Brand
Scotch-Brite™
Center Hole Diameter (Metric)
22.098 mm, 76.2 mm
Diameter (Metric)
101.6 mm, 1117.6 mm, 114.3 mm, 1219.2 mm, 127 mm, 152.4 mm, 177.8 mm, 190.5 mm, 203.2 mm, 355.6 mm, 38.1 mm, 457.2 mm, 50.8 mm, 685.8 mm, 76.2 mm, 88.9 mm, 914.4 mm
Form Type
Disc, Right Angle
Grade
Coarse, Medium, Super Fine, Very Fine
Hole Configuration
Plain
Industries
Aerospace, General Industrial, Marine, Metalworking, MRO, Transportation & Heavy Equipment
Max RPM
1000, 10000, 12000, 13000, 13300, 1600, 2000, 20000, 23000, 25000, 600, 6000, 7000, 800, 8000, 8600, 9500
Mineral Type
Aluminum Oxide, Silicon Carbide
Position
Good
Primary Application
Other Door Assembly Applications
Product Form
Disc
Sub Industries
Metal Fabrication
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Singapore - English