1. All 3M Products
  • 3M™ Splice Kit UF1 Standard, 1.8 in (45,7 mm) connector, 8.0 in (203,2 mm) heat shrink tube, 6 kits per case
  • 3M™ Splice Kit UF1 Standard, 1.8 in (45,7 mm) connector, 8.0 in (203,2 mm) heat shrink tube, 6 kits per case

    Part Number UF1-Splice Kit-6 Kits3M ID 80610928980
    • Moisture-proof electrical connection for type UF-B underground feeder
    • Designed for use with non-shielded cables
    • Holds out moisture with the help of its heavy-wall tubing
    • Use with 14 to 8 AWG wire sizes
     More
    Details
    • Moisture-proof electrical connection for type UF-B underground feeder
    • Designed for use with non-shielded cables
    • Holds out moisture with the help of its heavy-wall tubing
    • Use with 14 to 8 AWG wire sizes
    • Assembly includes 4 cylindrical set screw connectors separated by vinyl insulation
    • Use on all your 600V-rated applications
    • Kit includes a 1.8-in terminal connector, an 8-in heavy-wall tube and an adhesive-lined heat shrink tube
    • Works well in temperatures ranging from -67 to 230 degrees F (-55 to 110 degrees C)
    • UL Listed and RoHS 2011/65/EU Compliant
    • Includes 6 kits per case

    3M™ Scotchlok™ UF Series Standard Splice Kit includes all the accessories required to offer a reliable, moisture-proof electrical connection for type UF-B underground feeders. This kit is suitable to use on 600V-rated, flat, non-shielded, UF cables.

    The UF Splice Kit consists of a connector-insulation assembly and a heat shrink tube. The connector assembly contains four cylindrical set screw connectors separated by a piece of vinyl insulation. The heat shrink tube is a heavy-wall, adhesive-lined tube. Underground Feeder (UF)-B cables are flat, and typically have three solid conductors without ground or two solid conductors with a ground. They range in size from 8 AWG to 14 AWG. The most common UF cable size is 10-14 AWG. The 3M UF Splice Kit is offered in two versions: UF1 Standard Kit includes a 1.8" length terminal connector and an 8" length of heavy-wall, adhesive-lined heat shrink tube. UF2 Stretcher Kit has an 11.7 inch terminal connector and a 20 inch length of heavy-wall, adhesive-lined heat shrink tube. The Standard Kit is used in most of the applications. The Stretcher Kit is used in situations where a 7-10 inch section of the cable has been damaged or destroyed. It eliminates two connectors and a short piece of cable during repair.

    Specifications
    Brand
    3M™
    Conductor Sizes
    10 AWG, 12 AWG, 14 AWG, 8 AWG
    Product Type
    Splice
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    RoHS 2011/65/EU compliant without exemption
    Voltage
    600 V