1. All 3M Products

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010NS Blue, 5 Gallon Pail Base, 1 per case

3M ID 62286585302
  • 10 minute work life
  • Structurally bonds polyolefins without surface preparation
  • Medium viscosity
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
 More
Details
  • 10 minute work life
  • Structurally bonds polyolefins without surface preparation
  • Medium viscosity
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
  • Medium viscosity allows controlled dispensing
  • 10 minute work life with 60 minute handling strength
  • Strong adhesive can replace screws, rivets and welding

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS is a non-sag, two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. Creates a Strong Bond on Low Surface Energy Plastics Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS bonds metals, ceramics, and wood and most other plastics. The non-sag formula creates rigid adhesion. We also formulate this adhesive with 8mil spacer beads for bond line spacing. Recommended Applications Joining plastics to metals, such as in the manufacture or repair of appliances Bonding low surface energy plastics without priming Impact resistance composite bonding Manufacture or repair of various sporting goods equipment Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs) Our 3M™ Scotch-Weld ™ Acrylic Adhesive DP8010NS starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F/22° C). Easy Adhesion with Acrylic Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

Specifications
Adhesive Type
Acrylic
Brand
Scotch-Weld™
Full Cure
8-24 Hours @ 72 F (22 C)
Hardness
60 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Military and Government, Specialty Vehicle, Transportation
Open Time
10 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Product Form
Gallon
Product Type
Structural Plastic Adhesive
Shear Strength at 72 Degrees F (22 Degrees C)
2700 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
6
Storage Temperature
<=40 Degree Fahrenheit
Viscosity
Non-Sag
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Singapore - English