1. All 3M Products
  • 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS
  • 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS

    3M ID B40066528
    • Creates strong bond on low surface energy (LSE) plastics such as polyolefin with minimal or no surface prep required
    • Delivers non-sag formulation so adhesive stays where when applied
    • Resists many chemicals, water, humidity and corrosion
    • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
     More
    Details
    • Creates strong bond on low surface energy (LSE) plastics such as polyolefin with minimal or no surface prep required
    • Delivers non-sag formulation so adhesive stays where when applied
    • Resists many chemicals, water, humidity and corrosion
    • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
    • Medium viscosity allows controlled dispensing
    • 10 minute work life with 60 minute handling strength
    • Strong adhesive can replace screws, rivets and welding

    3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS is a non-sag, two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

    When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.

    Creates a Strong Bond on Low Surface Energy Plastics
    Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010NS bonds metals, ceramics, and wood and most other plastics. The non-sag formula creates rigid adhesion. We also formulate this adhesive with 8mil spacer beads for bond line spacing.

    Recommended Applications

    • Joining plastics to metals, such as in the manufacture or repair of appliances
    • Bonding low surface energy plastics without priming
    • Impact resistance composite bonding
    • Manufacture or repair of various sporting goods equipment
    • Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)

    Our 3M™ Scotch-Weld ™ Acrylic Adhesive DP8010NS starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F/22° C).

    Easy Adhesion with Acrylic
    Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

    Specifications
    Adhesive Type
    Acrylic
    Application
    Bonding Composite Materials
    Brand
    3M™, Scotch-Weld™
    Container Size (Imperial)
    1.52 fl oz (US)
    Design Challenges
    Noise Vibration & Harshness Control NVH
    Full Cure Time
    8-24 Hours @ 72 F (22 C)
    Hardness
    60 Shore D
    Indoor/Outdoor
    Both
    Industries
    Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
    Maximum Operating Temperature (Celsius)
    66 Degree Celsius
    Open Time
    10 Minute
    Physical Form
    Flowable Liquid
    Position
    Best
    Product Color
    Blue
    Product Form
    Cartridge
    Product Type
    Acrylic Adhesive
    Shear Strength
    2700 psi
    Shelf Life in Months (from date of manufacture)
    12
    Storage Temperature
    <=40 Degree Fahrenheit
    Substrate 1
    Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass & Ceramics, Metal, Nylon - Fiber Reinforced, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood & Hardboard
    Substrate 2
    Engineered Thermoplastics, Epoxy - Fiber Reinforced, Glass & Ceramics, Metal, Nylon - Fiber Reinforced, Painted Surface, Hard-to-Bond (LSE), Plastic, Hard-to-Bond (LSE), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Polypropylene, Thermoplastics, Thermosets - Fiber Reinforced, Wood & Hardboard
    Viscosity
    Non-Sag
    Volume (Imperial)
    1.58 fl oz
    Volume (Metric)
    45 mL
    Work Time
    8 Minutes
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    Singapore - English