1. All 3M Products
  • 3M™ Novec™ 1700 Electronic Grade Coating 12 lb 1 gal Container
  • 3M™ Novec™ 1700 Electronic Grade Coating 12 lb 1 gal Container

    3M ID 98021229947
    • Protection for your sensitive electronics
    • Non-flammable
    • Low in toxicity
    • Non-ozone depleting
     More
    Details
    • Protection for your sensitive electronics
    • Non-flammable
    • Low in toxicity
    • Non-ozone depleting
    • RoHS compliant
    • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists

    3M™ Novec™ 1700 Electronic Grade Coating is a clear, low viscosity, low surface tension solution of a fluorochemical acrylic polymer carried in a hydrofluoroether solvent. Designed for moisture and corrosion protection of printed circuit boards and electronic components, it dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It is easy to apply, does not need post-curing, is removable and repairable. It is non-flammable, low in toxicity, non-ozone depleting and RoHS compliant.

    Additional information: 3M™ Novec™ 1700 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a clear, low viscosity, low surface tension solution of a fluorinated acrylate polymer dissolved at 2% (w/w) in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, brush or syringe dispensing), air-dries in seconds, may require little or no masking and is removable and repairable.

    Specifications
    Application
    Anti-Stiction, Chemical Protection, Corrosion Protection, Moisture Protection
    Application Category
    Electronic Coatings
    Application Method
    Solution applied by dipping (preferred), spray, or syringe dispense
    Available Container Sizes
    12 lb (5.4 kg) 1 Gal Container
    Brand
    Novec™
    Coating Location
    Electronic Device Components
    Coating Thickness (Dip Coated)
    0.1 µm - 0.2 µm (approximate)
    Coverage Area
    Depends on the application
    Dielectric Constant
    3.2 (@1kHz, 30%RH)
    Dielectric Strength (V/mil)
    2000 V/mil
    Dissipation Factor
    0.002 (@1kHz, 30% RH)
    Dry Time
    5 - 30 Seconds
    Net Weight (Imperial)
    12 lb.
    Net Weight (Metric)
    5.4 kg
    Overall Width (Imperial)
    9.563 Inch
    Overall Width (Metric)
    24.29 cm
    Polymer Type
    Fluoroacrylate
    Product Form
    Liquid
    Product Series
    Novec 1700
    Product Type
    Protecting
    Removability
    Removable with 3M™ Novec™ Engineered Fluid 72DA or Novec 7100
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    Yes (including Directive (EU) 2015/863)
    Solids Level
    2 %
    Storage Temperature
    60 °F - 80 °F (16 °C - 27 °C)
    Thermal Cure Time and Temperature
    No need to cure
    UV Detectable
    No
    Volume (Metric)
    3.8 L
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    Singapore - English