1. All 3M Products

3M™ Nitrile High Performance Plastic Adhesive 1099 Tan, 1 Gallon, 4 per case

3M ID 62109975300
  • Fast drying and heat curable
  • Resists weathering, water, oil, plasticizer migration, and alphalitic fuels
  • Meets MMM-A-189C, Class 2
  • Optional heat cure increases bond strength
 More
Details
  • Fast drying and heat curable
  • Resists weathering, water, oil, plasticizer migration, and alphalitic fuels
  • Meets MMM-A-189C, Class 2
  • Optional heat cure increases bond strength
  • Sprayable with industrial grade spray equipment

3M™ Nitrile High Performance Plastic Adhesive 1099 dries quickly with an open time of approximately 40 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water, oil and fuel. Additionally, it bonds well to plastics and vinyl, providing long-term adhesion as well as good resistance to plasticizer migration.

Ideal for Vinyl & Plastic Our 3M™ Nitrile High Performance Plastic Adhesive 1099 bonds to a variety of substrates – primarily leather and most vinyl sheeting as used in awnings, upholstery and faux leather – as well as plastics, for a strong, enduring bond. However, it may stain thin or light-colored vinyls. Recommended Applications Bonding most vinyls and plastics (not recommended for polyolefin plastic bonding) Aftermarket automotive repair, including panel installation and upholstery Banners and awnings General industrial MRO Speed Up the Bonding Process  With 3M™ Nitrile High Performance Plastic Adhesive 1099 you can quickly meet the requirements of your bonding application. This fast drying adhesive forms a durable bond at room temperature, but also has optional heat-initiated chemical reaction to achieve even higher bond properties. Additionally, this adhesive is sprayable with industrial grade spray equipment, bringing convenience and consistency to large scale applications. Applying Your Adhesive ​Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

Specifications
Application Method
Brush, Flow
Brand
3M™
Heat Resistance
<230 Degree Fahrenheit
Industries
Consumer Goods, Furniture, General Industrial
Open Time
Up to 40 minutes
Physical Form
Medium liquid
Product Form
Bulk
Solids Weight Percent (Approximate)
31 to 37 Percent
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Singapore - English