1. All 3M Products

3M™ Flap Disc 747D

  • 3M-engineered ceramic aluminum oxide blend abrasive is fast-cutting and efficient
  • Exceptional life on hard metals
  • Runs cool due to grinding aid
  • Good for mild deburring and flat finishing
 More
All Models
Close
Details
  • 3M-engineered ceramic aluminum oxide blend abrasive is fast-cutting and efficient
  • Exceptional life on hard metals
  • Runs cool due to grinding aid
  • Good for mild deburring and flat finishing

We designed the 3M™ Flap Disc 747D as a ceramic grain abrasive flap disc with a durable, X-weight cotton backing for working with stainless and carbon steels. Designed to run on a right angle grinder, a flap disc is a one-step alternative to bonded wheels and fiber discs. A unique grinding aid minimizes heat while maintaining life on heat sensitive alloys such as stainless steel.

Flap Discs Do Double Duty Grind and finish in a single step with the 3M™ Flap Disc 747D. Flap discs provide the stock removal capabilities of a bonded wheel with the surface finishing characteristics of a resin fiber disc. Lower cost per grind and fewer process steps in applications such as weld grinding, deburring, rust removal, edge grinding, and weld seam blending make our flap disc desirable when it’s an option. Our 3M Flap discs exhibit lower gouge potential than that of grinding wheels and fiber discs. Operators prefer the discs because they are lighter in weight and easier to control. And because they do double duty, there is less downtime to change product. Also, less vibration and noise mean less operator fatigue. While these flap discs are particularly suited to working with stainless steel, their versatility allows them to work effectively on other metals as well. Overlapping Flaps Use All the Abrasive Grain We attach a series of abrasive cloth flaps to a backing in a fan-like arrangement around a hub. The working mineral is consolidated on the edge of the disc so a maximal amount of the working material is utilized. As the flaps wear during use, new cutting grain is continually exposed to the work surface, so they can far outlast typical discs. By reducing steps and lasting longer, our flap discs can greatly improve productivity in grinding operations. Quick-Change Attachment System The 747D quick-change flap disc features a TN-style attachment system. Screw the old disc off and the new one onto the shaft of your right angle grinder with two or three swift twists. Less time lost to change-over means more producing material. 3M knows efficiency is key to your operations. We leverage a broad platform of technological expertise to build solutions to keep your business and your employees working smoothly.

Specifications
Application Category
Blending/Deburring, Finishing/Polishing, Grinding/Metal Stock Removal
Applications
Deburring, Finishing, Grinding, Polishing
Attachment Type
Threaded, TN
Backing Material
Cloth
Backing Weight
X Weight, Y Weight
Brand
3M™
Center Hole Diameter (Metric)
22.225 mm, 25 mm
Coat Type
Closed Coat
Diameter (Metric)
114.3 mm, 127 mm, 177.8 mm, 38
Form Type
Type 27
Grade
P120, P50, P60, P80
Grit
36, 50, 60, 80, P120, P36, P60, P80
Industries
Marine, Metalworking
Length (Metric)
162.6 mm, 190.5 mm, 195.6 mm
Max RPM
13300, 8600
Mineral Type
Ceramic, Ceramic Aluminum Oxide
Net Weight (Metric)
0.82 kg, 1.04 kg, 1.07 kg, 1.12 kg, 1.18 kg
Packaged Form
Boxed
Position
Better
Product Form
Disc
Sub Industries
Metal Fabrication
Width (Metric)
147.3 mm, 190.5 mm, 195.6 mm
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Singapore - English