1. All 3M Products

3M™ Fastbond™ Contact Adhesive 30H

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
  • Post-formable, heat resistant and non-flammable in the wet state
  • Low mist formula reduces waste and improves coverage over standard sprays
  • Creates a very high strength, heat resistant bond
 More
All Models
Close
Details
  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
  • Post-formable, heat resistant and non-flammable in the wet state
  • Low mist formula reduces waste and improves coverage over standard sprays
  • Creates a very high strength, heat resistant bond
  • Adhesive can be applied by spray, brush or rolled to help improve efficiency in application

3M™ Low Mist Contact Adhesive 30 is a water-dispersed, high-strength adhesive that provides high coverage and immediate bond strength. It features a long bonding range and good heat resistance. The low mist formula helps reduce waste, providing an economical solution that maximizes coverage when sprayed.

Low Mist Adhesion 3M™ Low Mist Contact Adhesive 30 is a low mist, one-part, water-dispersed contact adhesive. With a four-hour bonding range, it creates a very high strength bond capable of resisting high temperatures. The low mist formulation provides an economical, high coverage spray that maximizes the adhesive. This adhesive is post-formable, heat resistant and non-flammable in its wet state, which may help reduce risk of fire and assist with compliance for insurance regulations. It is ideal for decorative laminate applications where non-flammability and low VOCs are critical. 3M™ Low Mist Contact Adhesive 30 is ideal for bonding, adhering, gluing, joining and attaching a variety of substrates. This product is not recommended for drywall laminating or for bonding metal surfaces. Recommended Applications Most formed plastics Plastic laminate Wood Plywood Wood veneer Canvas High Immediate Strength, Long Bonding Range Formulated for success, 3M™ Low Mist Contact Adhesive 30 delivers high immediate bonding strength with a long bonding range. Our design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. Applying Your Adhesive Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

Specifications
Application Method
Brush, Roll, Spray
Brand
Fastbond™
Container Size (Imperial)
270 Gallon, 55 Gallon
Environmental Considerations
GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD
Flame Retardant
Non-flammable
Heat Resistance
<230 Degree Fahrenheit
Industries
General Industrial
Open Time
Up to 4 hours
Product Color
Green
Product Form
Bulk
Solids Weight Percent (Approximate)
42.4 to 50 Percent
Volume (Imperial)
270 gal, 52 gal
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Singapore - English