1. All 3M Products

3M™ Double Coated Tape 9500PC

11  Products
  • Clear, 5 mil (0.14 mm) double coated tape with high performance acrylic
  • 1.0 mil, clear PET carrier film for dimensional stability and ease of die cutting
  • Adheres to powder coated surfaces, most plastics and difficult surfaces
  • High-holding strength and short-term heat resistance up to 350°F (177°C)
 More
Overall Length (Imperial)
Overall_Length_Imperial
Overall Width (Imperial)
Overall_Width_Imperial
Overall Width (Metric)
Overall_Width_Metric
11 Products Available
 Overall Length (Imperial), Overall Width (Imperial)  Overall Width (Metric)
All Models
Close
Details
  • Clear, 5 mil (0.14 mm) double coated tape with high performance acrylic
  • 1.0 mil, clear PET carrier film for dimensional stability and ease of die cutting
  • Adheres to powder coated surfaces, most plastics and difficult surfaces
  • High-holding strength and short-term heat resistance up to 350°F (177°C)
  • 58# unprinted polycoated kraft liner reduces edge burr during hard tool die cutting

3M™ Double Coated Tape 9500PC is a 5 mil (0.14 mm) 350 high performance acrylic adhesive double coat with a thin polyester carrier film on a 58#, 4.5 mil unprinted, polycoated kraft paper liner. The adhesive excels on low surface energy (LSE) substrates and at high temps.

Our 3M™ Double Coated Tape 9500PC has a 1.0 mil polyester carrier for improved dimensional stability and handling – especially in die cutting and laminating applications. This tape can be used to laminate high performance plastics and difficult substrates, while delivering broad temperature resistance. Toward that end, this tape can be used in temperatures ranging from -40°F (-40°C) to 350°F (177°C). Additionally, users enjoy medium UV resistance, helping to expand the durability and longevity of this product. Recommended Applications Bonding low surface energy (LSE) plastics such as polypropylene and polyethylene High temperature applications Die cutting Laminating The 350 Advantage 3M™ Adhesive 350 family is a medium-firm acrylic adhesive that provides excellent shear holding power and initial adhesion; as well as high wet grab, temperature and UV resistance. The liner reduces edge burr during hard tool die cutting, improving accuracy and potentially improving throughput. Collectively, these features make this tape suitable for use in various applications across different industries, including: converter solutions, transportation, specialty vehicle, metalworking, automotive, oil and gas, medical, signage, military and government, general industrial, appliance and electronics. 

Specifications
Adhesive Type
3M™ High Performance Acrylic Adhesive 350
Back-Side Adhesive Thickness (metric)
0.058 mm, 0.06 mm
Back-Side Adhesive Type
3M™ High Performance Acrylic Adhesive 350
Brand
3M™
Carrier Material
Polyester Film (PET)
Carrier Thickness (metric)
0.03 mm
Consumer Label
No
Core Size (Metric)
76.2 mm
Face-Side Adhesive Thickness (metric)
0.058 mm, 0.06 mm
Face-Side Adhesive Type
3M™ High Performance Acrylic Adhesive 350
Indoor/Outdoor
Both
Industries
Appliance, Automotive, Converter Solutions, Electronics, General Industrial, Medical, Metalworking, Military and Government, Oil and Gas, Signage, Specialty Vehicle, Transportation
Maximum Operating Temperature (Celsius)
177 Degree Celsius
Overall Length (Imperial)
36 yd
Overall Length (Metric)
32.91 Meter
Overall Thickness (Imperial)
5.6 mil
Overall Width (Imperial)
0.5 in, 0.75 in, 1 in, 1.5 in, 12 in, 18 in, 24 in, 4 in, 48 in
Overall Width (Metric)
101.6 mm, 12.7 mm, 122 cm, 19.05 mm, 25.4 mm, 304.8 mm, 38.1 mm, 457.2 mm, 609.6 mm
Position
Best
Primary Liner
62# Polycoated Kraft Paper (PCK)
Primary Liner Color
Tan
Product Color
Transparent
Product Form
Roll
Total Tape Thickness without Liner (Metric)
0.14 mm, 0.142 mm
Follow Us
The brands listed above are trademarks of 3M.
Change Location
Singapore - English