1. All 3M Products
  • 3M™ Cold Shrink Splicing Kit QS2001B, Tape, Wire, Unishield, 15 kV, Standard, 1 per case
  • 3M™ Cold Shrink Splicing Kit QS2001B, Tape, Wire, Unishield, 15 kV, Standard, 1 per case

    Part Number QS2001B3M ID 80611265754
    • Specially designed to connect extruded dielectric power cables
    • Designed for JCN, CN, tape shield, UniShield® and wire shield cables
    • 1 to 1.35-in O.D. insulation
    • Accommodates wire size of 2 AWG to 500 kcmil
     More
    Details
    • Specially designed to connect extruded dielectric power cables
    • Designed for JCN, CN, tape shield, UniShield® and wire shield cables
    • 1 to 1.35-in O.D. insulation
    • Accommodates wire size of 2 AWG to 500 kcmil
    • Includes 1 roll Scotch® electrical semi-conductive tape 13, 2 outer covers and 1 roll 3M™ Temflex™ vinyl electrical tape 1800
    • Rated for 15 kV applications
    • 1 kit/case

    3M™ QS-2001B Series Cold Shrink Branch Splice Kit is specially designed to connect extruded dielectric power cables that are rated at 15 kV. The kit uses cold shrink technology for superior interfacial pressure and comes in a versatile design to make installation easy. It is used with JCN, CN, tape shield, UniShield® and wire shield cables.

    3M™ Cold Shrink Branch Splice QS-2001B lets you easily splice and tap extruded dielectric power cables rated up to 15kV. This silicone rubber splice provides economical, effective installations without force pushing, pulling or heat (torch) of traditional splices.
    Since 3M invented it more than 30 years ago, Cold Shrink technology has been proven reliable by field use and laboratory testing. It offers interfacial pressure superior to that of push-on and heat shrink splices.
    The 3M™ Cold Shrink Branch Splice QS-2001B kit connects medium-voltage cables including cross-linked polyethylene (XLPE) and ethylene propylene rubber (EPR), metallic wire, tape shield or JCN and plastic jacket. The set-screw connector in the QS-2001B kit adapts to a range of cable sizes. The 3M™ Cold Shrink Branch Splice QS-2001B can be used as an aerial splice, on cable trays or in direct burial applications. It is available with an adapter kit for splicing with cables of smaller diameter.
    This factory-tested splice meets requirements specified in the IEEE-404 Standard.

    Insulation Outside Diameter Range:
    · 1.00 - 1.35 Inch, 0.63 - 1.01 Inch (with QS2000BA Accessory)
    · 25.4 - 34.29 mm, 16.26 - 25.65 mm (with QS2000BA Accessory)

    Specifications
    Brand
    3M™
    Cable Shielding
    Tape Shield, UniShield®, Wire Shield
    Conductor Sizes
    1 AWG (with QS2000BA Accessory), 1/0 AWG (with QS2000BA Accessory), 2 AWG (with QS2000BA Accessory), 2/0 AWG (with QS2000BA Accessory), 250 kcmil (with QS2000BA Accessory), 3/0 AWG (with QS2000BA Accessory), 350 kcmil, 4/0 AWG (with QS2000BA Accessory), 400 kcmil, 500 kcmil
    Connector Included
    Yes
    Insulation O.D. Range (Metric)
    25,4 - 34,3 mm (16,2 - 25,6 mm with QS-2000BA Adapter Kit)
    Model
    Cold Shrink
    Number of Conductors
    1
    Product Series
    QS2001B Series
    Product Technology
    Cold Shrink
    Product Type
    Splice
    RoHS 2011/65/EU Compliant
    Undetermined
    RoHS EU Comments
    Contact 3M for information
    Splice Type
    Branch
    Suggested Accessory
    3M™ Cold Shrink Branch Splice Adapter Kit QS-2000BA
    Voltage
    15 kV
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    Singapore - English