1. All 3M Products
  • 3M™ Cold Shrink Insulator 8426-9P, 2/0 AWG-250 kcmil (70-125 mm²), 10 per case - Pointof purchase
  • 3M™ Cold Shrink Insulator 8426-9P, 2/0 AWG-250 kcmil (70-125 mm²), 10 per case - Pointof purchase

    Part Number 8426-9P3M ID 80610928378
    • Specifically intended to provide primary insulation for solid dielectric cable splices and wires that are rated up to 1000V
    • Simple installation which requires no tools
    • Suitable for insulating secondary splices, direct-buried or submersible and dig-in repairs
    • Insulates cable or connectors within a diameter range of 0.55 - 1.18 in (13,9 - 30,1 mm)
     More
    View Legal Disclaimer
    Details
    • Specifically intended to provide primary insulation for solid dielectric cable splices and wires that are rated up to 1000V
    • Simple installation which requires no tools
    • Suitable for insulating secondary splices, direct-buried or submersible and dig-in repairs
    • Insulates cable or connectors within a diameter range of 0.55 - 1.18 in (13,9 - 30,1 mm)
    • This insulator can house conductor sizes ranging from 2/0 AWG to 250 kcmil
    • Made of EPDM rubber which contains no chlorides or sulfur
    • Withstands temperatures of -40 to 194 degrees F (-40 to 90 degrees C)
    • Seals out environmental hazards on a variety of nonelectrical applications and communication installations
    • ANSI Certified and RoHS 2011/65/EU Compliant
    • Available 10 to a case

    3M™ 8420 Cold Shrink Connector Insulator is an open-ended, tubular sleeve that provides ozone, acids and alkalis resistance. This environmental sealing insulator offers primary electrical insulation for 1 kV-rated applications. The tough, durable, EPDM rubber construction makes the insulator withstand operating temperatures of -40 to 194 degrees F (-40 to 90 degrees C).

    3M™ 8420 Connector Insulator is designed for use on all solid dielectric insulated wires and cable splices. This cold shrink insulator offers moisture-tight sealing while maintaining its prolonged resiliency and pressure. It is ideal for insulating secondary splices, direct-buried or submersible, dig-in repairs and physical protection of high-voltage, air-insulated connectors or lugs. ANSI Certified and RoHS 2011/65/EU Compliant.

    Specifications
    Brand
    3M™
    Cable Shielding
    Non-shielded, Tape Shield, UniShield®, Wire Shield
    Cable Type
    Power Cable
    Conductor Material
    Aluminum, Copper
    Conductor Sizes
    2/0 AWG, 250 kcmil, 3/0 AWG, 4/0 AWG
    Material
    EPDM Rubber
    Maximum Connector Length (metric)
    127.0 mm
    Maximum Operating Temperature (Celsius)
    90 Degree Celsius
    Model
    Cold-shrink
    Number of Conductors
    1
    Product Type
    Splice
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    RoHS 2011/65/EU compliant without exemption
    Splice Type
    Cold Shrink
    Voltage
    1 kV

    Legal Disclaimer

    Manufacturing Origin: USA

    The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

    Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.